Thermodynamic Steam Trap Miyawaki Japan, Model BKF 25SF, 1.6 MPC, temperature 300C

AED 1,300.00

Immediate discharge of condensate – Insensitive to water hammer, superheated steam and freezing – Can be installed in vertical or horizontal position
Suitable for light to medium condensate loads: steam tracing, steam main drips, small heat exchangers, unit heaters, sterilizers and many other applications in the petrochemical, chemical, textile, food, pharma-ceutical and further industries. Series SV Thermodynamic steam traps with inbuilt bypass are designed for special applications in the food, pharmaceutical or other industries or for laundry applications where costs and space must be saved.

Clear
SKU: N/A Category:

Description

Thermodynamic steam traps operate on the basis of the Bernoulli principle, depending on the relationship between the velocity and the pressure exerted by the condensate and steam inside the steam trap. They have only one moving part – the disc. Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate near the saturation temperature. The traps may operate up to a back pressure of 80% of the inlet pressure, but for smooth operation it is recommended that the back pressure does not exceed 50% of the inlet pressure. Thermodynamic steam traps discharge the condensate intermittently.

Additional information

Size

DN 15 (1/2"), DN 20 (3/4"), DN 25 (1"), DN 40 (1-1/2"), DN 50 (2")

Reviews

There are no reviews yet.

Be the first to review “Thermodynamic Steam Trap Miyawaki Japan, Model BKF 25SF, 1.6 MPC, temperature 300C”

Your email address will not be published. Required fields are marked *